Optima Tenor Banjo Silver Strings 2705 is a four-string set for tenor banjo, manufactured in Germany by Optima. Designed for standard fifths tuning C–G–D–A, the strings feature loop ends for compatible banjo tailpieces.
The set combines two plain Silver Steel treble strings with two silver-plated copper-wound bass strings. This construction provides a defined attack in the upper register and a fuller, smoother tonal character in the lower strings.
Important: manufacturer part number 2705 refers to the standard Loop End set. For banjos requiring ball-end strings, Optima offers the separate 2705.K version. Check your tailpiece before ordering.
The sound of Optima Silver Strings
The tenor banjo has a distinctive bright, lively sound with a clearly defined attack. String design is especially important for rhythmic chord playing and fast melodic passages.
Optima describes its banjo strings as producing the traditional banjo twang, a characteristic attack and subtle variation in the tone following the pluck.
According to Optima, silver-plated wound strings have a smoother tonal character than conventional phosphor bronze-wound strings. This provides an interesting balance between banjo clarity and a more rounded tone in the lower register.
The set can be used for traditional jazz, Dixieland, dance music and other styles where precise articulation and rhythmic clarity are important.
Actual sound also depends on the instrument's scale length, head tension, bridge, resonator and playing technique.
Silver Steel and silver-plated copper winding
The A and D strings are plain steel strings made from Optima's Silver Steel wire. They do not have a silver winding.
The G and C strings feature steel cores with silver-plated copper wire winding. The winding increases the mass of the string, allowing lower pitches without requiring an excessively thick solid steel wire.
The silver coating is applied to the copper winding. The name Silver Strings does not mean that all four strings are made from solid silver.
The roundwound construction offers a traditional feel and banjo sound. Players seeking a polished chrome-wound alternative can consider Optima's separate Chrome Strings 2711 range.
String gauges and set contents
| String |
Gauge |
Construction |
Single-string no. |
| 1 — A |
.009″ |
Plain Silver Steel |
2701 |
| 2 — D |
.012″ |
Plain Silver Steel |
2702 |
| 3 — G |
.022″ |
Silver-plated copper wound |
2703 |
| 4 — C |
.031″ |
Silver-plated copper wound |
2704 |
Gauges .009, .012, .022 and .031 are expressed in thousandths of an inch. For wound strings, the figure refers to the overall outside diameter, including winding.
Standard C–G–D–A tuning
A conventional tenor banjo is tuned in fifths, from the lowest-pitched string to the highest:
C – G – D – A
From the first, highest string to the fourth, lowest string, the sequence is A – D – G – C. This is the tuning specified by Optima for set 2705.
For Irish tenor banjo players: Irish traditional music frequently uses the lower G–D–A–E tuning. Different string gauges are normally selected for that setup. Optima 2705 is designed for C–G–D–A and should not automatically be considered suitable for low Irish tuning.
Loop End attachment
All four strings have loop ends designed to attach to compatible hooks or posts on a tenor banjo tailpiece.
Optima offers several versions of this string family:
- 2705 — standard Loop End set.
- 2705.K — Ball End version.
- 2705.V — extended-length Loop End set.
- 2705.KV — extended-length Ball End set.
These versions differ in attachment and/or length. Choose an extended version only after checking the required string length for your instrument.
Technical specifications
| Manufacturer |
Optima Musiksaiten GmbH |
| Series |
Silver Strings |
| Manufacturer part no. |
2705 |
| GEWA part no. |
658.485 |
| Instrument |
4-string tenor banjo |
| Tuning |
C–G–D–A, in fifths |
| Gauges |
.009 / .012 / .022 / .031″ |
| Treble strings |
Plain Silver Steel |
| Bass strings |
Silver-plated copper winding |
| String ends |
Loop End |
| Contents |
4 strings |
| Made in |
Germany |
Installation and maintenance
Check that the loop ends match your tailpiece before installation. Replace one string at a time to help preserve the position of the movable banjo bridge.
Bring the strings gradually up to pitch while monitoring bridge alignment. After playing, wipe them with a soft, dry cloth to remove moisture and deposits from the metal surfaces.
Replace the strings if their winding is damaged, substantial corrosion develops or tuning and tonal performance deteriorate noticeably.
Please note: Optima 2705 is a four-string tenor banjo set for C–G–D–A tuning with loop ends. It is not a five-string banjo set and differs from the Optima 2705.K Ball End version.