Optima Tenor Banjo Silver Strings 2705.KV is a German-made extended-length four-string set with Ball Ends for tenor banjo. It is intended for traditional fifths tuning C–G–D–A.
The 2705.KV combines two important features: extra string length and ball-end attachment. It is designed for instruments that require a longer overall string length than standard Optima 2705.K.
Before ordering: check both your instrument's required string length and its tailpiece attachment. Optima 2705.KV offers extended length with Ball Ends.
Sound and string construction
Optima Silver Strings are designed to retain the characteristic tenor-banjo sound, with a clear attack and distinctive twang.
A and D are plain Silver Steel strings providing direct response and well-defined articulation. Silver Steel is a type of steel wire, not solid silver.
G and C feature steel cores with silver-plated copper winding. The added winding mass supports the lower register without excessively thick strings. According to Optima, silver-plated winding offers a smoother tonal character than conventional phosphor bronze winding.
The set is suitable for traditional jazz, Dixieland, rhythmic accompaniment and melodic tenor-banjo playing. Actual tonal results also depend on the banjo head, bridge, scale length and playing technique.
String gauges
| String |
Gauge |
Diameter |
Material |
| 1 — A |
.009″ |
0.229 mm |
Plain Silver Steel |
| 2 — D |
.012″ |
0.305 mm |
Plain Silver Steel |
| 3 — G |
.022″ |
0.559 mm |
Silver-plated copper wound |
| 4 — C |
.031″ |
0.787 mm |
Silver-plated copper wound |
Millimetre values are rounded. Wound-string gauges refer to the outside diameter including winding.
Extended length: what does it mean?
The required overall string length depends not only on the vibrating scale length between nut and bridge but also on the distance to the tailpiece and the length needed for the tuning peg.
The 2705.KV provides extra length for instruments that cannot accommodate standard-length strings. Extra overall length does not automatically increase string tension when the scale length, tuning and gauges remain unchanged.
The manufacturer has not provided a verified overall length in millimetres in the available specifications. Measure the required string length before ordering for a non-standard instrument.
Tuning and compatibility
Standard tenor-banjo tuning is C–G–D–A from lowest to highest, or A–D–G–C from the first to fourth string.
Irish tenor banjos frequently use lower G–D–A–E tuning, generally requiring different string gauges. Optima 2705.KV should not automatically be regarded as suitable for that alternative tuning.
Comparison of Optima 2705 versions
| Part number |
Length |
End |
| 2705 |
Standard |
Loop |
| 2705.K |
Standard |
Ball |
| 2705.V |
Extended |
Loop |
| 2705.KV |
Extended |
Ball |
Technical specifications
| Manufacturer |
Optima Musiksaiten GmbH |
| Part number |
2705.KV |
| Series |
Silver Strings |
| Instrument |
Four-string tenor banjo |
| Tuning |
C–G–D–A |
| Gauges |
.009 / .012 / .022 / .031″ |
| Length |
Extended |
| Attachment |
Ball End |
| Treble strings |
Plain Silver Steel |
| Bass strings |
Silver-plated copper wound |
| Contents |
4 strings |
| Made in |
Germany |
Installation and maintenance
Check that the ball ends fit your tailpiece. Replace one string at a time to help preserve the position of the movable banjo bridge. Bring the strings gradually up to pitch while checking bridge alignment.
After playing, wipe away moisture and dirt with a soft, dry cloth. Replace the strings if corrosion, damaged winding or deteriorating tuning performance becomes noticeable.
Please note: Optima 2705.KV is an extended-length four-string tenor-banjo set with Ball Ends. The extended Loop End version is Optima 2705.V. Not intended for five-string banjos.