Optima Tenor Banjo Silver Strings 2705.V is an extended-length four-string set for tenor banjo, manufactured in Germany. This version is designed for instruments requiring longer strings than the standard Optima 2705 set. It features Loop End attachment and is intended for conventional C–G–D–A tuning in fifths.
The set combines two plain Silver Steel treble strings with two silver-plated copper-wound lower strings. This traditional construction delivers a distinct upper-register attack and a smoother, rounder low-register tone.
What makes 2705.V different? It is the extended-length version with loop ends. It differs from standard 2705 in length and from 2705.KV in attachment type. A separate ball-end version is available for compatible tailpieces.
When are extended-length strings needed?
Required string length depends on more than the banjo's scale length, measured from nut to bridge. The distance from bridge to tailpiece and the length needed for secure winding around the tuning peg also matter.
On some tenor banjos, standard-length strings may not provide sufficient length for proper installation. The extended Optima 2705.V version addresses this requirement while retaining the familiar Silver Strings specification.
Measure the old string from its tailpiece attachment to the tuning peg before ordering. On wound strings, it is also important to ensure that the wound section reaches the appropriate contact points.
Extended length does not automatically mean greater tension. String tension depends on the string's construction, gauge, vibrating length and pitch. Extra length outside the vibrating section does not itself increase tension when scale length and tuning remain unchanged.
Silver Strings tonal character
The tenor banjo is recognised for its bright sound and immediate attack. These characteristics are important in rhythmic chord accompaniment and clearly articulated melodic playing.
Optima describes its banjo strings as delivering the familiar twang associated with the instrument: a distinctive attack and tonal movement following the pluck.
According to the manufacturer, silver-plated wound strings have a smoother sound than conventional phosphor bronze-wound strings, complementing the clarity of the plain steel trebles.
The actual tone also depends on head tension, bridge position, scale length, resonator design and playing technique.
String construction
A and D — plain Silver Steel. Steel strings without winding, designed for a direct, clear response. The term Silver Steel refers to the steel wire type, not solid silver construction.
G and C — silver-plated copper wound. A steel core with silver-plated copper winding increases mass for lower pitches without excessive thickness.
The silver is a coating on the winding of the two lower strings; these are not solid silver strings.
String gauges and set contents
| String |
Gauge |
Diameter |
Construction |
| 1 — A |
.009″ |
0.229 mm |
Plain steel |
| 2 — D |
.012″ |
0.305 mm |
Plain steel |
| 3 — G |
.022″ |
0.559 mm |
Silver-plated copper wound |
| 4 — C |
.031″ |
0.787 mm |
Silver-plated copper wound |
Gauges follow the published Optima Tenor Banjo Silver Strings family specifications. Millimetre values are rounded. Wound-string gauges include the winding.
C–G–D–A tuning
Standard tenor-banjo tuning is in fifths, C–G–D–A from lowest to highest, or A–D–G–C from the first to fourth string.
Irish tenor banjo is often played in the lower G–D–A–E tuning, which generally requires different string gauges. Optima 2705.V should not automatically be regarded as appropriate for that tuning.
Comparing the Optima 2705 versions
| Part number |
Length |
End |
| 2705 |
Standard |
Loop |
| 2705.K |
Standard |
Ball |
| 2705.V |
Extended |
Loop |
| 2705.KV |
Extended |
Ball |
Technical specifications
| Manufacturer |
Optima Musiksaiten GmbH |
| Series |
Silver Strings |
| Manufacturer part number |
2705.V |
| Instrument |
Four-string tenor banjo |
| Set contents |
4 strings |
| Length version |
Extended |
| Attachment |
Loop End |
| Tuning |
C–G–D–A |
| Gauges |
.009 / .012 / .022 / .031″ |
| Treble strings |
Plain Silver Steel |
| Lower strings |
Silver-plated copper winding |
| Made in |
Germany |
Installation and care
Check that the loop ends match your tailpiece. Replace one string at a time to preserve the position of the movable bridge. With extended-length strings, ensure that the wound sections are correctly positioned relative to the bridge and nut.
Bring the strings gradually up to pitch. After playing, wipe away moisture and residue with a soft, dry cloth. Replace strings when the winding is damaged, corrosion develops or tuning performance deteriorates.
Please note: Optima 2705.V is an extended-length four-string tenor-banjo set with loop ends. An exact overall length in millimetres has not been verified from the available specifications. Check the required length for non-standard instruments before ordering.