Optima Tenor Banjo Chrome Strings 2711.K is a German-made four-string set for tenor banjo featuring Ball End attachments. The two treble strings are plain Silver Steel, while the G and C strings feature polished chrome-nickel winding.
Designed for conventional C–G–D–A tuning in fifths, the Chrome Strings set offers a smoother surface on the wound strings, helping to improve comfort and reduce finger-sliding noise.
Attachment matters: Optima 2711.K has Ball Ends. The standard 2711 version uses Loop Ends. Materials and gauges are the same, but the correct end type must match your banjo tailpiece.
Polished chrome-nickel winding
The German description geschliffen indicates an additional finishing and polishing process applied to the wound strings.
Conventional roundwound strings have a noticeable surface texture formed by the winding wire. As the player's fingers move across the string, this texture can generate sliding noise.
Polishing produces a smoother surface, reducing the feel of the winding ridges and potentially decreasing unwanted finger noise during position changes.
The treatment applies to G and C only. The A and D strings are unwound plain steel.
Although the smoother construction may reduce handling noise, the exact result also depends on playing technique, string condition and the instrument itself.
Materials and sound
A and D — Silver Steel: plain steel strings providing a direct response and clearly defined attack. Silver Steel is a designation for the steel wire, not a claim that the string is made of silver.
G and C — Chrome Nickel Polished: wound strings with polished chrome-nickel winding. The winding provides the additional mass required for the lower notes at practical string diameters.
The tenor banjo is known for its lively sound, immediate attack and characteristic twang. The Chrome Strings series retains this general character while offering a different winding material and a smoother surface.
Compared with Optima Silver Strings 2705, which use silver-plated copper winding, the Chrome Strings differ in material and finish. This is particularly noticeable in playing feel; tonal differences also depend on the specific banjo and the musician's technique.
String gauges and contents
| String |
Gauge |
Construction |
| 1 — A |
.009″ / 0.229 mm |
Plain Silver Steel |
| 2 — D |
.012″ / 0.305 mm |
Plain Silver Steel |
| 3 — G |
.022″ / 0.559 mm |
Polished Chrome Nickel winding |
| 4 — C |
.031″ / 0.787 mm |
Polished Chrome Nickel winding |
Millimetre values are rounded. Wound-string gauges refer to the overall diameter including winding. The manufacturer lists the corresponding standard single strings as 2701 (A), 2702 (D), 2709 (G) and 2710 (C); this set contains their ball-end configurations.
Tuning and playing applications
The conventional tenor-banjo tuning is C–G–D–A from lowest to highest. From the first string to the fourth, it is A–D–G–C.
The set can be used for traditional jazz, Dixieland, rhythmic chord accompaniment and melodic playing on suitably tuned four-string tenor banjos.
Irish tenor banjo: the lower G–D–A–E tuning commonly requires a different choice of string gauges. Optima 2711.K should not automatically be considered compatible with that setup.
Ball End attachment
Each string has a metal ball that is retained in a compatible banjo tailpiece. Unlike Loop End strings, the Ball End design does not require the string loop to be placed over a hook or post.
Before ordering, check which end type your banjo tailpiece accepts. If it requires loops, choose Optima Chrome Strings 2711 instead.
Comparison of Optima sets
| Model |
G and C winding |
Ends |
| 2705 |
Silver-plated copper |
Loop |
| 2705.K |
Silver-plated copper |
Ball |
| 2711 |
Polished Chrome Nickel |
Loop |
| 2711.K |
Polished Chrome Nickel |
Ball |
Technical specifications
| Manufacturer |
Optima Musiksaiten GmbH |
| Optima part number |
2711.K |
| Series |
Chrome Strings Polished |
| Instrument |
Four-string tenor banjo |
| Tuning |
C–G–D–A |
| Gauges |
.009 / .012 / .022 / .031″ |
| A and D |
Plain Silver Steel |
| G and C |
Polished Chrome Nickel winding |
| String ends |
Ball End |
| Set contents |
4 strings |
| Country of manufacture |
Germany |
Installation and maintenance
Make sure the Ball Ends fit securely into your tailpiece. Replace one string at a time to preserve the position of the movable banjo bridge.
Bring the new strings gradually up to pitch. After playing, wipe them with a soft, dry cloth to remove moisture and fingerprints. Avoid abrasive cleaning products on the polished winding.
Please note: Optima 2711.K is a four-string polished Chrome Strings tenor-banjo set with Ball Ends. The Loop End version is Optima 2711. Not intended for five-string banjos.