Optima 5-String Banjo Silver Strings 3006 is a German-made string set for the traditional American five-string banjo. It combines plain Silver Steel strings with silver-plated wound strings and features Loop End attachments on all five strings.
Designed to deliver the characteristic banjo attack and distinctive twang, the set includes a short fifth drone string, an essential feature of five-string banjo playing. Optima specifies the string pitches as D–B–G–C–G, listed from the first string to the fifth.
Important tuning detail: Optima lists the fourth string as C, rather than the D used in the common Open G tuning. Check your intended tuning before installing the set.
The five-string banjo configuration
A five-string banjo differs from a four-string tenor banjo in both its construction and tuning. Its distinctive short fifth string normally begins near the fifth fret and is tuned to a relatively high note.
This fifth string acts as a drone, contributing a recurring high-pitched note to rhythmic patterns. It plays an important part in bluegrass and old-time banjo techniques, including fingerpicking and clawhammer styles.
In the Optima 3006 set, both the first and fifth strings have a diameter of .009″, although they occupy different positions and have different vibrating lengths.
String construction and tone
Strings 1, 2 and 5 — Silver Steel. These are plain steel strings intended to provide a clear attack and direct response. Silver Steel is a description of the wire material, not an indication of solid silver construction.
Strings 3 and 4 — silver-plated copper winding. Winding adds mass to the strings, helping produce lower pitches without excessive string diameter. GEWA specifies silver-plated copper wire for the wound strings.
Optima describes its banjo strings as providing the familiar twang associated with the instrument. According to the manufacturer, silver-plated wound strings have a smoother tonal character than conventional phosphor bronze-wound strings.
The final sound depends on the instrument's head tension, bridge, scale length and playing technique.
Complete string specification
| String |
Pitch |
Gauge |
Construction |
Part no. |
| 1 |
D |
.009″ / 0.229 mm |
Plain Silver Steel |
3001 |
| 2 |
B natural |
.012″ / 0.305 mm |
Plain Silver Steel |
3002 |
| 3 |
G |
.017″ / 0.432 mm |
Silver-plated wound |
3003 |
| 4 |
C |
.019″ / 0.483 mm |
Silver-plated wound |
3004 |
| 5 — short |
High G |
.009″ / 0.229 mm |
Plain Silver Steel |
3005 |
Gauges and single-string part numbers follow the Optima technical catalogue. Millimetre equivalents are rounded; wound-string diameters include the winding.
Tuning: C tuning versus Open G
Optima specifies the notes d′ – b – g – c – g′ from first to fifth string. In conventional banjo order, fifth to first, this corresponds to g–C–G–B–D.
The widely used Open G tuning is g–D–G–B–D. The difference is the fourth string, which Optima lists as C instead of D.
Raising the fourth string from C to D increases its tension. Before using Open G, check your banjo's scale length and the suitability of the supplied string. The manufacturer's C specification should not be silently replaced by D.
Loop End attachment
All five strings feature Loop Ends intended for compatible banjo tailpieces. Optima also offers ball-end construction on request; however, product 3006 is the standard Loop End set.
Check your existing tailpiece before ordering, particularly if your previous strings used Ball Ends.
Technical specifications
| Manufacturer |
Optima Musiksaiten GmbH |
| Manufacturer part no. |
3006 |
| GEWA item no. |
658.477 |
| Series |
Silver Strings |
| Instrument |
Five-string banjo |
| Strings per set |
5 |
| Catalogue tuning |
g–C–G–B–D (5th to 1st) |
| Gauges |
.009 / .012 / .017 / .019 / .009″ |
| Plain strings |
1, 2 and 5 — Silver Steel |
| Wound strings |
3 and 4 — silver-plated copper winding |
| Attachment |
Loop End |
| Country of manufacture |
Germany |
Installation and care
When changing strings, pay attention to the short fifth string and the correct position of each string. Replacing one string at a time helps preserve the position of the movable banjo bridge.
Bring the strings gradually up to pitch and check the bridge alignment. After playing, wipe the strings with a soft, dry cloth to remove moisture and finger residue.
Please note: Optima 3006 is designed for five-string banjos with a short fifth drone string. It is not a four-string tenor-banjo set or a six-string guitar-banjo set.