Optima 3006.K 5-String Banjo Silver Strings is a German-made five-string banjo set featuring Ball End attachments. It combines plain Silver Steel strings with silver-plated copper-wound strings and includes the characteristic short fifth drone string.
The key difference from the standard Optima 3006 set is the attachment: 3006.K has ball ends, while 3006 has loop ends. Choosing the correct attachment is essential for compatibility with your banjo tailpiece.
Before ordering: check that your five-string banjo requires Ball Ends. If your tailpiece uses loops, choose the standard Optima 3006 version.
String construction and sound
Strings 1, 2 and 5 are plain Silver Steel. They provide a direct response and clearly defined attack. Silver Steel refers to the steel wire, not to solid silver.
Strings 3 and 4 feature silver-plated copper winding. The winding increases string mass, supporting lower pitches while maintaining manageable diameters.
Optima describes its banjo strings as offering the characteristic twang associated with traditional banjo music. According to the manufacturer, silver-plated winding provides a smoother tonal character than conventional phosphor bronze winding.
The set is suitable for five-string banjo techniques used in bluegrass, old-time and related styles. The actual sound also depends on head tension, bridge position, scale length and playing technique.
String gauges and contents
| String |
Catalogue pitch |
Gauge |
Construction |
| 1 |
D |
.009″ / 0.229 mm |
Plain Silver Steel |
| 2 |
B natural |
.012″ / 0.305 mm |
Plain Silver Steel |
| 3 |
G |
.017″ / 0.432 mm |
Silver-plated copper wound |
| 4 |
C |
.019″ / 0.483 mm |
Silver-plated copper wound |
| 5 — short |
High G |
.009″ / 0.229 mm |
Plain Silver Steel |
Gauge information follows the Optima 3006 string-family specification; the 3006.K variant uses Ball End attachment. Millimetre equivalents are rounded, and wound-string diameters include winding.
Short fifth string and tuning
Unlike four-string tenor banjos, the five-string banjo has a shorter fifth string that usually begins near the fifth fret. It acts as a high drone in clawhammer and three-finger picking techniques.
Optima lists the notes from first to fifth as D–B–G–C–G, corresponding to g–C–G–B–D when written from the fifth to first string.
The common Open G tuning is g–D–G–B–D. Here, the fourth string is raised from C to D, which increases its tension. Check scale length and string suitability before using that tuning.
Ball End attachment
Each string has a metal ball at one end, designed to seat in a compatible tailpiece. This differs from a Loop End, which is attached over a hook or post.
Not every banjo tailpiece accepts both attachment types. Check the existing strings or tailpiece construction before ordering.
Technical specifications
| Manufacturer |
Optima Musiksaiten GmbH |
| Product number |
3006.K |
| Series |
Silver Strings |
| Instrument |
Five-string banjo |
| Contents |
5 strings |
| Gauges |
.009 / .012 / .017 / .019 / .009″ |
| Plain strings |
1, 2, 5 — Silver Steel |
| Wound strings |
3, 4 — silver-plated copper winding |
| Attachment |
Ball End |
| Made in |
Germany |
Installation and care
Ensure that the balls fit securely in the tailpiece. Replace strings one at a time to preserve the movable bridge position, and bring them gradually up to pitch.
After playing, wipe the strings with a soft, dry cloth to remove moisture and finger residue. Regular cleaning helps protect the metal surface.
Please note: Optima 3006.K is the Ball End version for five-string banjo. Standard Optima 3006 uses Loop Ends. Not intended for four-string tenor banjos.