Optima 3006.KV 5-String Banjo Silver Strings is an extended-length five-string banjo set with Ball End attachments. The German-made Silver Strings range combines plain Silver Steel with silver-plated copper-wound strings.
The 3006.KV version is intended for banjos that require both extra string length and ball-end mounting. It includes the short fifth drone string characteristic of the American five-string banjo.
Before ordering: check the required overall length and the tailpiece attachment. Optima 3006.KV is designated as the extended Ball End version, whereas the regular 3006 uses Loop Ends.
Why choose extended-length strings?
The vibrating scale length of a banjo is measured between nut and bridge. However, the overall length needed for installation is greater because the string must also extend to the tailpiece and tuning peg.
Some instruments require additional string length owing to their particular construction or attachment layout. An extended set is designed for such situations.
Extra overall length does not automatically mean higher tension. Tension is determined by string construction, gauge, pitch and vibrating length. Additional length outside the vibrating section does not by itself increase tension.
The exact total length of Optima 3006.KV in millimetres has not been verified from the available published technical information. Check the required dimensions before ordering for a non-standard banjo.
Silver Strings: materials and sound
Strings 1, 2 and 5 use plain Silver Steel wire for a clear attack and immediate response. Silver Steel denotes a type of steel wire, not a solid-silver string.
Strings 3 and 4 use silver-plated copper winding. This provides additional mass for lower pitches while maintaining practical outside diameters.
Optima describes its banjo strings as delivering the instrument's characteristic twang. According to the manufacturer, silver-plated wound strings have a smoother tonal character than conventional phosphor bronze-wound strings.
The finished sound also depends on head tension, bridge position, scale length, resonator construction and playing technique.
String gauges and construction
| String |
Catalogue note |
Gauge |
Construction |
| 1 |
D |
.009″ / 0.229 mm |
Plain Silver Steel |
| 2 |
B natural |
.012″ / 0.305 mm |
Plain Silver Steel |
| 3 |
G |
.017″ / 0.432 mm |
Silver-plated copper wound |
| 4 |
C |
.019″ / 0.483 mm |
Silver-plated copper wound |
| 5 — short |
High G |
.009″ / 0.229 mm |
Plain Silver Steel |
Gauges are based on the published Optima 3006 Silver Strings family specifications. Millimetre values are rounded. Wound-string dimensions include the winding.
The short fifth string
The American five-string banjo is distinguished by a short fifth string, usually beginning near the fifth fret. It serves as a high drone and is an essential feature of bluegrass, old-time, clawhammer and three-finger picking styles.
In this string family, the first and fifth strings share the same .009″ gauge but have different positions and vibrating lengths.
Tuning: catalogue notes and Open G
Optima lists the notes for the 3006 family as D–B–G–C–G, from first to fifth string.
Written in the reverse order, fifth to first, this corresponds to g–C–G–B–D.
The widely used Open G tuning is g–D–G–B–D. The difference is the fourth string, shown as C in Optima's specification rather than D.
Raising that string from C to D increases its tension. Check the banjo scale length and the suitability of the string before retuning.
Ball End attachment
Each Ball End is designed to be retained by a suitable seat in the banjo tailpiece. This differs from Loop End strings, whose wire loops attach over hooks or posts.
Check the tailpiece design before purchase. Ball Ends and Loop Ends are not universally interchangeable.
Optima 3006 versions compared
| Part number |
Length |
End |
| 3006 |
Standard |
Loop |
| 3006.K |
Standard |
Ball |
| 3006.V |
Extended |
Loop |
| 3006.KV |
Extended |
Ball |
Special-variant designations follow the supplied product names: K indicates Ball End and V indicates extended length. Separate manufacturer listings for all variants have not been independently verified.
Technical specifications
| Manufacturer |
Optima Musiksaiten GmbH |
| Part number |
3006.KV / 3006KV |
| Series |
Silver Strings |
| Instrument |
Five-string banjo |
| Set contents |
5 strings |
| Length version |
Extended |
| Ends |
Ball End |
| Gauges |
.009 / .012 / .017 / .019 / .009″ |
| Plain strings |
1, 2 and 5 — Silver Steel |
| Wound strings |
3 and 4 — silver-plated copper winding |
| Made in |
Germany |
Installation and care
Before installation, ensure the Ball Ends fit the tailpiece and the overall string length is sufficient. Replacing one string at a time helps preserve the movable bridge position.
Gradually bring each new string up to pitch, paying particular attention to the short fifth string and the placement of the wound sections.
Wipe the strings with a soft, dry cloth after playing to remove moisture and residue. Replace them if corrosion or winding damage occurs.
Please note: Optima 3006.KV is an extended five-string banjo set with Ball Ends, not a four-string tenor-banjo set. The exact overall length in millimetres has not been confirmed.