Optima 3006.V 5-String Banjo Silver Strings is an extended-length five-string banjo set from German string manufacturer Optima. The Silver Strings range combines plain Silver Steel strings with silver-plated copper-wound lower strings.
The 3006.V extended version is intended for instruments that require longer overall strings than the standard Optima 3006 set. It includes the characteristic short fifth drone string and is suitable for traditional five-string banjo playing, including bluegrass, old-time, clawhammer and three-finger picking.
Important: the 3006.V is an extended-length version. Before ordering, check the overall string length required by your banjo and the attachment type. The standard 3006 uses Loop Ends; Ball End configurations are supplied separately.
When do you need extended-length banjo strings?
Overall string length is different from scale length. Scale length is the vibrating distance between the nut and bridge. Proper installation also requires enough string to reach the tailpiece and tuning peg, including sufficient length for winding around the peg.
Some banjos require more overall string length than a standard set can provide. The extended Optima 3006.V version is intended to address this requirement.
Before ordering, measure your existing strings from the tailpiece attachment to the tuning peg. For wound strings, check that the wound section is positioned correctly in relation to the bridge and nut.
Extended overall length does not automatically increase string tension. Tension depends on string construction, gauge, pitch and vibrating scale length. Extra string beyond the vibrating section does not itself increase tension.
The exact overall length of Optima 3006.V in millimetres could not be established from the available technical specifications.
Silver Strings construction and sound
Strings 1, 2 and 5 are plain Silver Steel strings. They offer a clear attack and immediate response. Silver Steel identifies the steel wire and does not mean these strings are made from silver.
Strings 3 and 4 feature steel cores with silver-plated copper winding. Winding increases the string mass needed for lower pitches while maintaining manageable diameters.
Optima describes its banjo strings as delivering the characteristic twang of traditional banjo playing. According to the manufacturer, silver-plated wound strings have a smoother tonal character than ordinary phosphor bronze-wound strings.
The actual sound also depends on banjo head tension, bridge position, scale length, resonator design and playing technique.
String gauges and set contents
| String |
Pitch |
Gauge |
Construction |
| 1 |
D |
.009″ / 0.229 mm |
Plain Silver Steel |
| 2 |
B natural |
.012″ / 0.305 mm |
Plain Silver Steel |
| 3 |
G |
.017″ / 0.432 mm |
Silver-plated copper wound |
| 4 |
C |
.019″ / 0.483 mm |
Silver-plated copper wound |
| 5 — short |
High G |
.009″ / 0.229 mm |
Plain Silver Steel |
Gauges and construction follow the published Optima 3006 Silver Strings family specifications. Millimetre equivalents are rounded. Wound-string diameters include the winding.
The short fifth string
The American five-string banjo differs from the four-string tenor banjo in having a shorter fifth string, normally beginning near the fifth fret. It is commonly used as a high drone in traditional banjo techniques.
The first and fifth strings of the Optima set both have a nominal gauge of .009″, despite their different positions and vibrating lengths.
Catalogue tuning and Open G
Optima lists the pitches for the 3006 family from first to fifth as D–B–G–C–G. Written from the fifth string to the first, this corresponds to g–C–G–B–D.
The common Open G tuning is g–D–G–B–D. Its fourth string is tuned to D instead of the C specified in the Optima table.
Raising the fourth string from C to D increases its tension. Check the scale length and suitability of the string before retuning it.
Comparing Optima Silver Strings versions
| Part no. |
Version |
End type |
| 3006 |
Standard |
Loop End |
| 3006.K |
Standard |
Ball End |
| 3006.V |
Extended |
Loop End |
The Loop End assignment for 3006.V follows the standard version and the absence of the .K suffix; check the actual product attachment before ordering.
Technical specifications
| Manufacturer |
Optima Musiksaiten GmbH |
| Part number |
3006.V |
| Series |
Silver Strings |
| Instrument |
Five-string banjo |
| Set contents |
5 strings |
| Length version |
Extended |
| Expected attachment |
Loop End |
| Gauges |
.009 / .012 / .017 / .019 / .009″ |
| Plain strings |
1, 2 and 5 — Silver Steel |
| Wound strings |
3 and 4 — silver-plated copper winding |
| Made in |
Germany |
Installation and care
Check the attachment type and the required overall string length before installation. Replacing one string at a time helps maintain the position of the movable banjo bridge.
Pay special attention to the short fifth string. Gradually bring the new strings up to pitch, then wipe them with a soft, dry cloth after playing.
Please note: Optima 3006.V is an extended-length set for five-string banjo. Its exact total length in millimetres has not been independently confirmed. Check the required dimensions for non-standard instruments before ordering.