Deluxe Fret Saw for Guitar Fingerboard
Fine saw with reinforced back for fret wire grooves in guitar fingerboards. The unset crosscut teeth allow tear-free, straight cuts across the grain. Cedar wood handle.
Deluxe Saws
Hand-made - for the highest demands
A hand-made master saws for the highest demands provide unparalleled control, surprising balance and the finest kerfs. The handles are made of light kiri wood and wrapped in rattan.
- All saws are made by hand in numerous steps
- The blades are made from vacuum-melted White Paper Steel for maximum edge life
- Each blade is straightened manually with a straightening hammer and hand-engraved by the master himself
Through-hardened blade:
- Allows resharpening by hand
- If used correctly, these saws will serve you for life
The saw blades are hollowed by hand over the whole blade width to ensure the optimum blade thickness at each point of the blade:
- Ultimate flexibility and stability of the blade
- Ensures smooth, frictionless cutting
- Creates the cleanest cuts
Features
- Blade length 120 mm
- Overall length 320 mm
- Blade thickness 0.57 mm
- Crosscut teeth 1.1 mm
| EU legal representative:
DICTUM GmbH - MEHR ALS WERKZEUG
Gottlieb-Daimler-Str. 3
94447 Plattling
Deutschland
Telefon: +49 (0)9931 4058-100
Erreichbarkeit: Montag- Freitag, 08.00 - 19.00 Uhr
Telefax: +49 (0)9931 4058-101
URL: www.dictum.com
E-Mail: info@dictum.com
