DPA d:screet CORE 4060-OC-C-B00miniature microphone
DPA d: screet CORE 4060-OC-C-B00 miniature microphone, black, omnidirectional, MicroDot, normal SPL, WITHOUT CLIP
The CORE capsule provides additional clarity across the entire dynamic range - from low to high SPLs. The shift of the 1% mark of the total harmonic distortion enables an output tone reproduction without distortion of up to 14dB.
The result is an even more detailed and dynamic sound over the entire frequency range, especially in the upper and lower limit range of the frequency spectrum. In addition, the new CORE series has been improved in terms of shielding against interference radiation such as strong radio signals from belt-pack transmitters.
Technical specifications
- Directional characteristic: omnidirectional
- Capsule type: Pre-polarized capacitor element with vertical membrane
- Working principle: pressure receiver
- Power supply: Min. 5 V - max. 50 V via DPA adapter, 4063/67: Min. 3 V - max. 50 V via DPA adapter
- Frequency range: Soft Boost Grid: 20 Hz - 20 kHz ± 2 dB, 3 dB - boost at 8-20 kHz; High Boost Grid: 20 Hz - 20 kHz ± 2 dB, 10 dB - boost at 12 kHz; 4067: 50 Hz - 20 kHz ± 2 dB, 3 dB - soft boost at 8-20 kHz, low-cut -10 dB at 20 Hz
- Sensitivity (± 3 dB at 1 kHz): nominal 20 mV / Pa; -34 dB related to 1V / Pa
- Equivalent noise level, A-weighted: typ. 23 dB (A) related to 20 µPa (max. 26 dB (A))
- Equivalent noise level according to ITU-R BS.468-4: typ. 35 dB (max. 38 dB)
- Max. SPL: 134 dB SPL peak before clipping
- Total Harmonic Distortion (<1% THD): 129 dB SPL peak, 120 dB SPL RMS sine
- Polarity: Positive sound pressure generates positive voltage on the MicroDot pin
- Operating temperature range: -10 to 45 ° C
- Output impedance: 30-40 ohms
- Maximum cable length: up to 300 m
- Microphone length: 12.7 mm
- Microphone diameter: 5.4 mm
- Cable length: 1.8 m
- Cable diameter: 1.6 mm
- Weight: 0.075kg including cable and MicroDot connector