Guitar Machine Heads M6 180 Toplocking

Schaller M6 180 Toplocking

With this tuner the string is locked in the shaft by a handy knurled nut located on the rear of the peghead, resulting in a low overall height. 6-in-line models with two different shaft lengths (staggered).
Gear ratio 1:12.
Available in two housing versions: Works like a traditional machine head, but the string needn't be "wound up" any more. Instead it is inserted into the cam hole with the clamp screw loosened, locked with the clamp screw and can then be tuned at once. This makes changing your strings a lot faster and easier.
Only this patented locking system based on the ball socket principle prevents reliably from string notching and breakage. The string will not be wound onto the shaft any more. So it will stay in tune extremely well, perfect for non-locking tremolo systems.
With all its benefits the Schaller locking tuner is THE benchmark in the guitar sector! All sealed tuners are lubricated with Schaller special grease for lifetime maintenance-free service. All parts are precision-crafted and surface-finished, the self-locking drive ensures an even, delicate and steady tuning.
All string posts are made of high-grade brass and fitted into the housing with utmost precision, ensuring the best possible tuning accuracy and wear resistance. Besides the standard combinations (e.g. 6-in-line or 3/3), all tuner sets may also be ordered with any quantity of left and right tuners.
The banjo bolt has a standard length of 13mm; alternatively, it can be supplied with a 12mm or 16mm length as desired.