Rode SmartLav+ lavalier clip microphone
Rode SmartLav + lavalier microphone, black, cond., TRRS plug, for smartphones, incl. Pop screen, transport case
The smartLav + clip-on microphone certainly meets broadcast requirements and is therefore suitable for film, television and similar applications, but also for other areas that require a recording system that is as discreet as possible, which can even convincingly record several people. The smartLav + can be attached like a conventional clip-on microphone and connected to a smartphone in the vest pocket, etc. We recommend the “RØDE Rec” app for iOS devices for recording. With its omnidirectional characteristic, the smartLav + guarantees professional results even if it slips in the heat of the moment. A draft shield to absorb gusts of wind and explosive sounds (“B”, “T” ”and“ P ”) and a robust clip with cable routing are included in the scope of delivery. The Kevlar® reinforced cable prevents damage that can occur when the cable is squeezed or bent. The smartLav + can be used with any audio app that can record the signals present at the headphone socket. However, for maximum ease of use, we recommend the “RØDE Rec” app for Apple iOS devices. “RØDE Rec” transforms an iOS device into a flexible field recorder and offers numerous tone control settings, professional editing functions and the possibility of direct publication under SoundCloud and Dropbox.
characteristics
- Clip-on microphone with broadcast signal quality and TRRS connector
- Omnidirectional condenser capsule
- Very discreet miniature microphone (only 4.5mm)
- Compatible with iOS and many Android devices *
- Kevlar® reinforced cable
- Supplied with a windshield and sturdy clip
Technical specifications
- Acoustic principle: Permanently Polarize
- Active electronics: JFET
- Capsule: 0.10 "
- Directional characteristic: omnidirectional
- Registration direction: End
- Transmission range: 60Hz - 18kHz
- Output impedance: 3Ω
- Sound pressure level limit: 110dB (@ 1kHz, distortion factor of 1% at 1kΩ)
- Maximum output level: 189.0dBu (@ 1kHz, distortion factor of 1% into 1kΩ) (@ 1kHz, 1% THD into 1KΩ load)
- Sensitivity: -35.0dB re 1 Volt / Pascal (17.80mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Self-noise (A-weighted): 27dBA
- Output: TRRS output
- Dimensions (WxDxH): 1180x 4.5 x 4.5mm
- Weight: 0.006kg
The Electro-Voice company produces microphones and other equipment for sound engineering. All Electro-Voice products are available at a very attractive price. If a specific product is not available on our website, you can get in contact with us and we will inform you if it is possible to order it.
