Tascam DR-10CS Recorder for microphone
Tascam DR-10CS micro linear PCM recorder, micro USB, mono WAV, mini jack, for Sennheiser lavalier microphones
The recorders of the DR-10C series can be connected to a lavalier microphone and thus form a compact recording system that can be easily attached to the belt. The DR-10CS is designed for Sennheiser microphones. An exchangeable connection plate for Sony / Ramsa (AK-DR10CR) is also available. The recorders have both input and output and can therefore be used either independently or in conjunction with a wireless transmitter. When used with a transmitter, the recordings made with the device serve as security in the event of interruptions in the radio connection. In lectures or lectures, this makes it possible to record all of the material directly at the source, i.e. before it reaches the amplifier system. And at weddings or reality TV productions, the device serves as a compact recording system for microphones worn on the body. The lightweight DR-10C runs for more than eight hours on a single AAA battery and uses microSD cards as a storage medium. Its practical recording functions include automatic level control and an impact sound filter. And in dual recording mode, the unit makes a copy of the audio material at a lower level as a backup in case any distortion occurs.
Features
- Micro-linear PCM recorder for lavalier microphones
- Can be switched between a lavalier microphone and a wireless pocket transmitter to create a safety recording
- Mono recording in BWF format with 48 kHz sampling rate and a resolution of 24 bits
- Uses a microSD / microSDHC card as a recording medium (up to 32 GB)
- If necessary, creates two recording files with different recording levels at the same time, so that a distortion-free file can be used in the event of overload
- Key lock to prevent the recorder from being switched off accidentally
- Switchable limiter to avoid overload
- Switchable low-cut filter to suppress unwanted bass
- Automatic level control
- Automatic continuation of the recording with a new file after a specified interval (can be switched on / off)
- Playback function to check recordings on headphones
- Headphone jack
- Internal clock to timestamp recording files
- OLED display with excellent display quality
- Micro USB port for easy file exchange with a computer
- Power supply via USB or an alkaline battery or a NiMH battery (size AAA)
- More than eight hours of recording time on a single AAA battery
- Settings can be created in a text file on a computer and then transferred to the DR-10C via USB
- Settings can be transferred to other DR-10C via infrared transmission
- Firmware update possible via the microSD card
- DR-10CS for Sennheiser microphones, optional extension available for Sony / Ramsa (AK-DR10CR)
Technical specifications
General
- Recording media: microSD card (64 MB - 2 GB), microSDHC card (4–32 GB)
- Recording and playback formats: Mono WAV files (BWF format), 48 kHz, 24 bit
Inputs and outputs
- Analog input (microphone): DR-10CS (for Sennheiser): 3.5 mm mini jack socket, screwable
- Maximum input level: –12 dBV
- Minimum input level: –53 dBV
- Gain of the microphone input: 10 dB to 35 dB (depending on the setting under MODEL SELECT)
- Input impedance: 33 kΩ or higher
- Analog output (to the transmitter): DR-10CS (for Sennheiser): 3.5 mm mini jack socket, screwable
- Analog output (headphone connection): 3.5 mm stereo mini jack socket (output mono on both sides)
Performance data audio, input to headphone output
- Frequency range: 20 Hz - 22 kHz, + 1 / –3 dB
- Distortion: 0.05% (1 kHz sinusoidal signal, maximum input level)
- Signal to noise ratio: 88 dB or greater (PHONES control max., MIC GAIN set to LO)
Power supply and other data
- Power supply: 1 × alkaline battery, lithium battery or NiMH battery type AAA, USB connection with a computer
- Power consumption: 0.45 W (maximum)
- Current consumption (via the USB connection): 0.25 A (maximum)
- Date and time receipt: Secondary lithium battery (built-in)
- Permissible operating temperature range: 0–40 ° C
- Dimensions: 52x56x25 mm (without protruding parts)
- Weight: 0.63 kg (with battery), 0.51 kg (without battery)
The Tascam company produces recorder, microphones, headphones and other equipment for sound engineering. All Tascam products are available at a very attractive price. If a specific product is not available on our website, you can get in contact with us and we will inform you if it is possible to order it.
