DPA 2028-B-B01 Condenser vocal microphone

DPA 2028-B-B01 Condenser vocal microphone

DPA 2028-B-B01 Microphone

One mic allows you to capture true sound and produce an unforgettable show. Effortlessly. The DPA 2028 Vocal Microphone is designed for the unique challenges of live stage performances. It is a flexible handheld vocal mic, which provides transparent, fantastic vocals to performers from a wide range of markets including live, HoW, broadcast, etc. Use it wired or together with your favorite wireless system, either way, just plug it in and hear the vocals shine like never before.
DPA designed a brand new capsule for the 2028, which is an integral part of the mic. It is fixed in its position on top of the shock mount and can’t be dismounted. The newly-designed shock mount and pop filter have been developed specifically for the 2028.
On a live stage, the 2028 will deliver the same open and transparent sound that other DPA microphones deliver. In fact, it needs no (or very little) EQ to sound just like you are standing next to the singer listening to their performance. This allows the singer to use their voice just as if no mic was present, which puts less strain on them. In addition, it allows sound engineers to spend their time shaping the sound experience rather than covering up due to artifacts. This amazing transparency is unique for DPA vocal mics.

Features

• Renowned DPA sound
• Natural vocals – from folk to metal
• Reduces feedback issues
• Rugged enough for the live stage
• Uniform supercardioid directionality
• Extreme SPL handling

Specifications

• Directional patternSupercardioid
• Principle of operationPressure gradient
• Cartridge typePre-polarized condenser
• Effective frequency response20 Hz - 20 kHz
• Frequency range, ±2 dB, at 12 cm (4.7 in)100 Hz - 16 kHz. Permanent 3rd order low-cut filter at 80 Hz
• Sensitivity, nominal, ±3 dB at 1 kHz5 mV/Pa; -46 dB re. 1 V/Pa
• Equivalent noise level, A-weightedTyp. 22 dB(A) re. 20 µPa (max. 23 dB(A))
• Distortion, THD < 1%136 dB SPL RMS, 139 dB SPL peak
• Dynamic rangeTyp. 117 dB
• Max. SPL, THD 10%160 dB SPL peak
• Rated output impedance150 Ω
• Minimum load impedance1 kΩ
• Cable drive capability100 m (328 ft)
• Output balance principleImpedance balancing with Active Drive
• Common mode rejection ratio (CMRR)> 50 dB at 1 kHz
• Power supply (for full performance)48 V Phantom power (±4 V)
• Current consumptionMax 2.5 mA
• ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
• Weight286 g (10.1 oz)
• Diameter48 mm (1.9 in)
• Capsule diameter19 mm (0.75 in)
• Microphone length188 mm (7.4 in)
• Maximum output voltage, RMS9 Vrms; 19 dBV; 28 dBu
• Polarity+V at pin 2 for positive sound pressure