DPA d:fine CORE 4288-DC-F-F10-LH (Shure) Headset
DPA d: fine CORE 4288-DC-F-F10-LH Headset two-ear, beige, cardioid, TA4F Mini XLR, Mic Boom 120mm, for Shure bodypack transmitters
The CORE capsule provides additional clarity across the entire dynamic range - from low to high SPLs. The shift of the 1% mark of the total harmonic distortion enables an output tone reproduction without distortion of up to 14dB.
The result is an even more detailed and dynamic sound over the entire frequency range, especially in the upper and lower limit range of the frequency spectrum. In addition, the new CORE series has been improved in terms of shielding against interference radiation such as strong radio signals from belt-pack transmitters.
Technical specifications
- Directional characteristic: cardioid
- Working principle: pressure gradient
- Capsule type: Pre-polarized capacitor
- Frequency range: 20 Hz - 20 kHz
- Frequency range, + / - 2 dB, near field 3.2 cm (0.8 to 1.2 in): 100 Hz - 20 kHz (4 - 6 dB soft boost at 15 kHz)
- Sensitivity, nominal +/- 3 dB at 1 kHz: 6 mV / Pa; -44 DB right 1 V / Pa
- Noise level, A-rated: Typ. 26 dB (A) right 20 micropascals (max. 28 dB (A))
- Noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
- S / N ratio (A-weighted), right 1 kHz at 1 Pa (94 dB SPL): Typ. 68 dB (A)
- Total Harmonic Distortion (THD): <1% up to 123 dB SPL peak
- Total Harmonic Distortion (THD): <1% to 120 dB SPL RMS sine
- Dynamic range: Typ. 97 dB
- Max. SPL peak: 144 dB
- Output Impedance: From MicroDot: 30 - 40 ohms. From DAD6001 -BC: 100 ohms
- Cable driver capability: up to 300 m (984 ft) with DAD6001 -BC XLR adapter
- Output balance principle: signal balanced with DAD6001 -BC XLR adapter
- Common Mode Rejection Ratio (CMRR):> 60 dB from 50 Hz to 15 kHz with DAD6001 -BC XLR adapter
- Power supply: "For wireless systems: Min. 5 V through DPA adapter.
- Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001 -BC XLR adapter
- Connection: TA4F Mini XLR
- Color beige
- Cable color: beige
- Polarity: + V with MicroDot pin for positive sound pressure (and pin 2 on DAD6001 -BC XLR adapter)
- Temperature range: -40 ° C to 45 ° C (-40 ° F to 113 ° F)
- Relative humidity (RH): Up to 90%
- Microphone diameter: length: 10 mm, diameter: 5 mm
- Capsule diameter: 5.4 mm
- Microphone length: boom length: 120 mm
- Cable length: 1.25 m
- Cable diameter: 1.6 mm
- Weight:: approx 11g
The DPA company produces microphones and other equipment for sound engineering. All DPA products are available at a very attractive price. If a specific product is not available on our website, you can get in contact with us and we will inform you if it is possible to order it.
